Paradyne Hotwire 7975 - Manual (Page 124)

Index
IN-4 7975-A2-GB20-40 December 1998
SNMP Management Configuration, A-16
SNMP management
general, 1-5
limiting access, 7-4
SNMP NMS Security Options, A-16, A-17
SNMP Trap Options, NMS n IP Address, A-17
start-up, ATI, 2-1
status, test messages, 4-5
subnet, IP addresses, 8-1
Switchpack definitions, 3-8
Switchpack locations, 3-7
Switchpack S1 Definitions, 3-8
Switchpack S2 Definitions, 3-10
SYNC Data Port Tests, 5-7
Sync Port, LEDs, 4-10
SYNC Ports Options, A-4
SYNC Pt Down, status message, 4-3
SYNC Pt Failed, self-test result, 4-4
system, LEDs, 4-10
System Options, A-7
T
Telnet session
access level, A-12, A-13
enable/disable, A-11, A-12
inactivity timeout, A-9, A-12
login required, A-11, A-13
telnet session access, 7-1
telnet session options, A-11, A-12
terminal
communication parameters, 3-3
connecting, 3-3
terminal port, direct connection, 2-1
test
aborting, 5-12
Data Channel Loopback, 5-9
Data Terminal Loopback, 5-8
LED, 4-10
Line Loopback, 5-3
Network-Initiated DCLB, A-5
Port (DTE) Initiated Loopbacks, A-6
Remote Send Line Loopback, 5-5
Repeater Loopback, 5-4
Send and Monitor 511, 5-6
status messages, 4-5
SYNC Data Port, 5-7
terminating, 5-12
Test Duration, A-7
Test Timeout, A-7
Test menu, 5-2
testing, 5-1
timeout
Com port session inactivity, A-9
Telnet session inactivity, A-12
transmit clock inversion, A-5
transmit clock source, A-4
traps, SNMP, 6-2, B-1
troubleshooting, 6-5
error statistics, 4-6
performance statistics, 4-8
U
UNIX, TFTP server on, 3-15
user interface, 1-3, 3-3
async terminal, 2-1
how to access, 2-1
resetting/restoring access, 7-5
V
V.35 interface, C-11
V.54 Loop 3. See data terminal loopback (DTLB)
virtual function keys, 2-7
W
warmStart, B-1
weight of unit, D-1