Download code – Paradyne Hotwire 7975 User Manual

Page 43

Advertising

Initial Startup and Configuration

3-17

7975-A2-GB20-40

December 1998

Download Code

The Download Code screen allows you to download firmware from a TFTP
server. To access the Download Code screen, follow this menu selection
sequence:

Main Menu

→

Control

→

Download Code

ООООООООООООООООООООООООО

main/control/download_code

Hotwire

Model: 7975

DOWNLOAD CODE

Image File Name:

Clear

TFTP Server IP Address:

000.000.000.000

Clear

Destination:

DSL

Start Transfer: Yes

Packets Sent: 0000000

Packets Received: 0000000

Bytes Sent: 0000000

Bytes Received: 0000000

Transfer Status: Transfer Pending

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Procedure

To download firmware:

1. Position the cursor in the Image File Name field. Type the name of the file to

be downloaded.

The file name may be a regular path name expression of directory names
separated by a forward slash (/) ending with the file name. The total path
name length can be up to 128 characters.

2. Position the cursor in the TFTP Server IP Address field. Enter the TFTP

server IP address.

The first three digits of the IP address cannot be 000 or greater than 223.

3. Position the cursor in the Destination field. Use the spacebar to select a

network destination for the TFTP server. Select DSL if the TFTP server
destination is the DSL link or COM if the TFTP destination is the COM port.

4. Position the cursor at the Start Transfer field. Use the spacebar to select Yes.

Press Enter.

When the data transfer is complete, the Transfer Status field changes to

Completed successfully

5. Press the Escape key to return to the Control menu. Select Apply Download.

6. On the Apply Download screen, select Yes to reset the card and activate the

code.

Advertising

Popular Brands

Popular manuals