Paradyne HOTWIRE 8310 MVL - Manual (Page 16)

Hotwire DSLAM System Description
1-6 8000-A2-GB26-00 May 1998
Levels of Access
There are two levels of diagnostic/administrative access in the Hotwire DSLAM
system:
H Administrator
The Administrator has complete read/write access to the DSLAM system.
With Administrator permission, you can set specific parameters and variables
to configure cards, ports, interfaces, VLAN bridging, and endpoint selection.
H Operator
The Operator has read-only access and can view configuration information
and monitor performance but has no configuration modification permission.
Software Functionality
Depending upon your system access, you can:
H
Configure the system,
H Monitor the system, and/or
H
Run applications and diagnostic tests to troubleshoot the network.
Configuring the DSL Cards
The Hotwire DSLAM software provides DSL configuration options to:
H
Configure the DSL cards
H
Configure the interfaces and ports
H
Set up user accounts
H
Upload or download a copy of a card’s configuration data to or from a Trivial
File Transfer Protocol (TFTP) server
H Download a new version of the DSL and endpoint software
NOTE:
You must have Administrator permission to configure the system.
For more information about configuring the system, see Chapter 4, Configuring
the Hotwire DSLAM , and Chapter 5, 8310 MVL and 8510 DSL Card
Configuration .