Paradyne HOTWIRE 8310 MVL - Manual (Page 27)

Hotwire Menus and Screens
2-9 8000-A2-GB26-00 May 1998
Reviewing the Levels of Access
There are two levels of privileges on the Hotwire DSLAM system. Your user
accounts can be configured with a user name, password, and privilege of:
H Administrator, giving you access to all of the features of the system including
configuration options, or
H
Operator, giving you read-only access.
The default access is no login and password with administrator status. To provide
login security to the DSLAM, user accounts must be configured.
NOTE:
There must be at least one administrator configured in order to have system
security.
For information on configuring user accounts, see the Hotwire Management
Communications Controller (MCC) Card, IP Conservative, User’s Guide.
User Login Screen
You can log in to the Hotwire DSLAM system using either a local VT100-
compatible terminal or a remote Telnet connection. However, the Hotwire DSLAM
system accepts only one login session at a time.
At the User Login screen, enter your login ID and password.
NOTE:
The User Login screen only appears if one or more users have been defined.