Paradyne HOTWIRE 8310 MVL - Manual (Page 63)

Monitoring the Hotwire DSLAM
6-9 8000-A2-GB26-00 May 1998
Table 6-3. Monitor Interfaces Options
Active List (Active Interfaces List) B-C-A
Displays a list of the current status of all of the active interfaces in the card.
if – Number of the interface.
name – Name of the interface.
type – Interface type (static).
link – Name of the protocol on the interface.
state – Current state of the interface.
ll-state – Not applicable.
port – Port linked to this interface.
The only information that changes on this screen is the state (active or port-wait)
column.
Status (Interface Status) B-C-B
Displays a list of additional information, after a specific interface (port) has been
selected.
if name – Enter the name of the desired interface.
protocol – Type of protocol for the entered interface name.
port – Port linked to this interface.
restarts – Number of times interface has been restarted.
user – <na> or none.
type – Static.
link-downs – Number of times the link has gone down.
state – Active or prtwait.
inactivity T/O – Number of times the interface has timed out.