Paradyne HOTWIRE 8310 MVL - Manual (Page 47)

8310 MVL and 8510 DSL Card Configuration
5-5 8000-A2-GB26-00 May 1998
DSL Configuration Ports Screens
Use the system information submenu of the Ports screens to display the DSL
Ports screen.
"
Procedure
To configure ports:
1. Follow this menu sequence:
Configuration
→
Ports (A-B)
2. The Ports menu appears. Enter the desired value on each selected screen
and field as shown in Table 5-2 and press Return.
Table 5-2. Ports Options (1 of 3)
Ethernet Port A-B-A
Gives the user the ability to select full or half duplex on the Ethernet Port.
Port Name – Enter the port name (up to 7 characters).
Full Duplex – Enable/Disable (Default = Disable).
Function – Edit/Reset. Select Reset to have changes become active.