Paradyne HOTWIRE 8310 MVL - Manual (Page 22)

Hotwire Menus and Screens
2-4 8000-A2-GB26-00 May 1998
For example, in the above illustration, the following line is displayed:
Hotwire 8600: DSL01: 8510: __ M __ D UXXX
The first field indicates the chassis type. In this case, the system in use is the
Hotwire 8600 DSLAM system. The second field indicates the card selected.
In this example, the DSL01 card is selected. The remaining fields indicate
card status information, such as whether or not an alarm is present and the
status of the Ethernet link. Similar information is displayed on the Card
Selection screen. For information about these fields, see
Card Selection
Screen on page 2-10.
Commonly Used Navigation Keys
The following table lists navigation keys and their definitions. These commands
are used to move around the Hotwire DSLAM menus and screens.
Keys Definition
Ctrl-a Moves to the top menu
Ctrl-c Moves to the top of the current menu
Ctrl-k Moves up to the previous menu selection or entry field
Ctrl-l Refreshes the screen
Ctrl-n Moves down or to the next selection
Ctrl-p Moves back
Ctrl-r Resets counters (on monitoring statistics displays)
Ctrl-t Moves to the top menu
Ctrl-u Clears the current input or prompt line
Ctrl-v Displays pop-up menus
Ctrl-y Moves to the top menu
Ctrl-z Moves back or exits from screen
Up arrow Moves up to the previous menu selection or entry field
Down arrow Moves down to the next menu choice or entry field
Enter or Return Accepts entry
? Displays the Online help screen