Paradyne HOTWIRE 8310 MVL - Manual (Page 7)

v 8000-A2-GB26-00 May 1998
About This Guide
Document Purpose and Intended Audience
This guide describes how to configure and operate the software component of
the Hotwire Digital Subscriber Line Access Multiplexer (DSLAM) system. It is
intended for administrators and operators who maintain the networks that support
Hotwire operation.
A basic understanding of internetworking protocols and their features is assumed.
Specifically, you should have familiarity with Simple Network Management
Protocol (SNMP), Network Management Systems (NMSs), and the following
internetworking concepts:
H TCP/IP applications
H
IP and subnet addressing
H
IP forwarding (also referred to as IP routing)
H
Bridging
It is also assumed that you have already installed either the Hotwire 8600 or
8800 DSLAM. If you have not done so already, refer to the appropriate Hotwire
DSLAM Installation Guide for installation instructions.
NOTE:
It is highly recommended that you read the Hotwire DSLAM for 8310 MVL
and 8510 DSL Cards Network Configuration Guide before you begin to use
this guide and the Hotwire software. The
Hotwire DSLAM for 8310 MVL and
8510 DSL Cards Network Configuration Guide provides introductory
information about the Hotwire DSLAM network model and theories.