Proxim AP-4000 - Manual (Page 124)

Advanced Configuration AP-4000 Series User Guide
SSID/VLAN/Security
124
the same system separated per VLAN. See the Security Profile section for more information. Each SSID can support a
unique VLANs. In order for the AP to support multiple SSID/VLANs, VLAN Tagging must be enabled. These parameters
are configurable on the Wireless-A and Wireless-B sub-tabs.
Configuring an SSID/VLAN with VLAN Tagging Disabled
With VLAN tagging disabled (from the SSID/VLAN/Security > Mgmt VLAN tab), only one SSID can be configured per
interface. All parameters set on the Wireless-A or Wireless-B tab will be applied to that SSID.
1. Click SSID/VLAN/Security > Wireless-A or Wireless-B.
The SSID, VLAN, and Security Configuration page is displayed.
Figure 4-44 SSID, VLAN, and Security Configuration (VLAN Tagging Disabled)
2. Enable or disable RADIUS accounting on the VLAN/SSID by selecting Enable or Disable from the Accounting
Status drop-down menu.
3. Enable or disable RADIUS MAC authentication status on the VLAN/SSID by selecting Enable or Disable from the
RADIUS Authentication Status drop-down menu.
4. Enable or disable MAC Access Control List status on the VLAN/SSID by selecting Enable or Disable from the MAC
ACL Status drop-down menu.
5. Enter Rekeying Interval in seconds (between 60 and 65525). The default interval is 900 seconds.