Proxim AP-4000 - Manual (Page 25)

Installation and Initialization AP-4000 Series User Guide
Hardware Installation
25
Hardware Installation
Required Materials
• AP-4000/4000M/AP-4900M unit
• Mounting bracket with screws
• Power adapter
• Security cover
• Quick Start Flyer
Perform the following procedures to install the AP hardware:
• Cabling the AP-4000/4000M/4900M
• Installing the Security Cover
• Mounting the AP-4000/4000M/4900M
• Installing External Antennas
Cabling the AP-4000/4000M/4900M
Connect cables to the AP as follows:
1. Provide power to the AP, as follows:
a. Plug the power cord into the power jack (the left port) and connect the unit to an AC power outlet (100~240V,
50~60Hz).
b. If using Active Ethernet, connect power to the unit from a DC injector device, such as the ORiNOCO 1-Port Active
Ethernet DC Injector hub.
NOTE:
Before installing and using this product, see the
Regulatory Compliance section.
NOTE:
Avant l’installation et l’utilisation de ce produit, veuillez vous référer à la partie «
Regulatory
Compliance » (conformité aux réglementations).
NOTA:
Prima di installare ed utilizzare questo prodotto, fare riferimento alla sezione relativa alla “
Regulatory
Compliance ” (conformità alle norme).
ANMERKUNG:
Bitte lesen Sie vor der Installation und Verwendung dieses Produkts im Abschnitt „
Regulatory
Compliance ".
NOTA:
Antes de instalar y usar este producto, consulte la sección "
Regulatory Compliance ” (Cumplimiento
de la normativa).
注記 :
製品をインストールしてご使用になる前に、
の「 Regulatory Compliance 」セクションを参照し、使用許諾
に関する重要な事項を確認してください .