Proxim AP-4000 - Manual (Page 190)

Command Line Interface (CLI) AP-4000 Series User Guide
Parameter Tables
190
SNTP Parameters
Link Integrity Parameters
* Link integrity cannot be configured when the AP is configured to function as a Mesh AP.
Link Integrity IP Target Table
Name Type Value Access CLI Parameter
SNTP Group Group N/A R sntp
SNTP Status Integer enable
disable RW sntpstatus
Primary Server Name or
IP Address DisplayString 0 - 255 characters RW sntpprisvr
Secondary Server Name
or IP Address DisplayString 0 - 255 characters RW sntpsecsvr
Time Zone Integer See MIB for
requirements RW sntptimezone
Daylight Savings Time Integer -2
-1
0
+1
+2 RW sntpdaylightsaving
Year Integer32 N/A RW sntpyear
Month Integer32 1 - 12 RW sntpmonth
Day Integer32 1 - 31 RW sntpday
Hour Integer32 0 - 23 RW sntphour
Minutes Integer32 0 - 59 RW sntpmins
Seconds Integer32 0 - 59 RW sntpsecs
Addressing Format Integer ipaddress
name RW sntpaddrfmt
Name Type Value Access CLI Parameter
Link Integrity* Group N/A R linkint
Link Integrity Status* Integer enable
disable (default) RW linkintstatus
Link Integrity Poll Interval* Integer 500 - 15000 ms
(in increments of 500ms)
500 ms (default) RW linkintpollint
Link Integrity Poll
Retransmissions* Integer 0 - 255
5 (default) RW linkintpollretx
Name Type Value Access CLI Parameter
Link Integrity IP Target Table Table N/A R linkinttbl
Table Index Integer 1 - 5 N/A index
Target IP Address IpAddress User Defined RW ipaddr
Comment (optional) DisplayString User Defined (up to 254
characters) RW cmt
Status (optional) Integer enable
disable (default)
delete RW status