Proxim AP-4000 - Manual (Page 27)

Installation and Initialization AP-4000 Series User Guide
Hardware Installation
27
Once you have chosen a final location for your unit, mount the AP-4000/4000M/4900M to a wall, to a T-bar ceiling, or in a
vehicle as described below.
Mounting the AP-4000/4000M/4900M to a Ceiling
1. Attach the mounting plate to the bottom of the AP-4000/4000M/4900M by lining up the keyholes and attaching it with
two screws.
2. Snap the tabs onto the ceiling T-bar. Rotate the AP-4000/4000M/4900M until it snaps on to the T-bar.
Figure 2-5 AP-4000/4000M/4900M Mounting Plate
Mounting the AP-4000/4000M/4900M to a Wall
1. Put the mounting plate up to the wall.
2. Screw through the mounting plate.
3. Place the AP up against the mounting plate. Orient the AP with the long access vertical, with the connectors facing to
the left.
Mounting the AP-4900M in a Vehicle
1. Attach the mounting plate up to the wall or to the wall partition (cage) behind the passenger seat in a vehicle. The
knobs that fit into the keyholes on the AP-4900M should be in a vertical line.
2. Screw through the mounting plate.
3. Place the AP up against the mounting plate. Orient the AP with the long access vertical, with the connectors facing
right.