Proxim AP-4000 - Manual (Page 52)

Advanced Configuration AP-4000 Series User Guide
Network
52
Figure 4-8 SNTP Configuration Screen
You can configure and view the following parameters within the SNTP screen:
• SNTP Status: Select Enable or Disable from the drop-down menu. The selected status will determine which of the
parameters on the SNTP screen are configurable.
NOTE: When SNTP is enabled, it will take some time for the AP to retrieve the time of day from the configured time
servers and update the relevant date and time parameters.
• Addressing Format: If SNTP is enabled, choose whether you will use the host name or the IP address to configure
the primary/secondary SNTP servers. If these servers are configured with the host name, the DNS client feature must
be enabled and configured properly.
• Primary Server Name or IP Address: If SNTP is enabled, enter the host name or IP address of the primary SNTP
server.
• Secondary Server Name or IP Address: If SNTP is enabled, enter the host name or IP address of the secondary
SNTP server.
• Time Zone: Select the appropriate time zone from the drop down menu.
• Daylight Savings Time: Select the number of hours to adjust for daylight savings time.
• Time and Date Information: When SNTP is disabled, the following time-relevant objects are manually configurable.
When SNTP is enabled, these objects are grayed out: