Proxim AP-4000 - Manual (Page 200)

Command Line Interface (CLI) AP-4000 Series User Guide
Parameter Tables
200
Serial Port Parameters
RADIUS Based Management Access Parameters
The RADIUS Based Management Access parameters allow you to enable HTTP or Telnet Radius Management Access,
enable or disable local user access, and configure the local user password.
The default local user ID is root and the default local user password is public. “Root” cannot be configured as a valid user
for RADIUS based management access when local user access is enabled.
SSH Parameters
The following commands enable or disable SSH and set the SSH host key.
The AP SSH feature, open-SSH, confirms to the SSH protocol, and supports SSH version 2. The following SSH clients
have been verified to interoperate with the AP’s server. The following table lists the clients, version number, and the
website of the client.
For key generation, only the OpenSSH client has been verified.
Name Type Value Access CLI Parameter
Serial Group N/A R serial
Baud Rate Integer 2400, 4800,9600
(default), 19200, 38400,
57600 RW serbaudrate
Data Bits Integer 8 R serdatabits
Parity Integer none R serparity
Stop Bits Integer 1 R serstopbits
Flow Control Value none (default)
xonxoff RW serflowctrl
Name Type Value Access CLI Parameter
Radius Local User Status Integer enable
disable RW radlocaluserstatus
Radius Local User
Password DisplayString User Defined RW radlocaluserpasswd
HTTP Radius
Management Access Integer enable
disable RW httpradiusmgmtaccess
Telnet Radius
Management Access Integer enable
disable RW telradiusmgmtaccess
Name Type Value Access CLI Parameter
SSH Status Integer enable
disable RW sshstatus
SSH Public Host Key
Fingerprint DisplayString AP Generated RW sshkeyfprint
SSH Host Key Status Integer create
delete RW sshkeystatus
Clients Version Website
OpenSSH V3.4-2 http://www.openssh.com
Putty Rel 0.53b http://www.chiark.greenend.org.uk
Zoc 5.00 http://www.emtec.com
Axessh V2.5 http://www.labf.com