Panasonic DVCPRO AJ-D250P - Manual (Page 14)

14
1
Insert the cassette tape.
<Note>
Check that the SERVO lamp has lighted during playback. The playback image will be disturbed
if the lamp is off or flashing.
2
Press the PLAY button.
Normal playback is now commenced.
3
Press the STOP button to end the playback.
The unit is now set to the STOP mode.
Cue/review
Playback
Hold down the FF or REW button during playback.
While this button is pressed, the tape will be cued or reviewed at about 10 times the normal tape
speed.
Normal playback is restored when the button is released.
O
When ON has been selected as the SEARCH CUE setup menu item setting, the CUE track
sound will be output during cue or review. (See page 34)
Still picture playback
Press the PAUSE/STILL button during playback.
Normal playback is restored when the PAUSE/STILL button is pressed again.
O
No sound will be heard during still picture playback.
1
Press the PAUSE/STILL button while the cassette tape is playing.
When ON has been selected as the AUTO BACK setup menu item setting, the tape will
be rewound for about 2 seconds starting from the position where the PAUSE/STILL was
pressed. (See page 29)
Pause/record (frame-to-frame continuity)
2
Press the REC button to set the unit to the REC PAUSE mode.
The monitor display now switches to the E-E screen.
3
Press the PAUSE/STILL button to commence recording.
The tape travels to the position where the PAUSE/STILL was pressed in step
1 above,
and recording commences.
<Note>
The E-E screen is now displayed.
Operation