Panasonic DVCPRO AJ-D250P - Manual (Page 16)

16
1
Set the unit to the menu mode (by setting the LOCAL/MENU/REMOTE switch to the
MENU position).
<Notes>
O
“– –:– –:– –:– –” appears on the display when the points have not been set. In this case,
repeat playback will start at the beginning of the tape which serves as the BEGIN point and
end at the end of the tape which serves as the END point.
O
When the MODE button (REW button) is pressed instead of the SET button upon completion
of the settings, the time code setting will be canceled.
2
3
4
Select the digit to be changed (blinking display) using the UP button (FF button) or
DOWN button (STOP button).
The frame digits cannot be selected. They always appear as “00.”
5
DO decreENU.(or)]TJ0 -DATA+TfT*-0.0PAUSE/STILLWN bunnot be son).DO-DATAen tTfT*-0.0PLAYTc(The frame di.83 Tm0 Tc(5)Tj/F5 1 Tf10 0 12the unit4 364688 Tm0.018mpletion)]91b]91b]9115.8 0 10on).