Panasonic DVCPRO AJ-D250P - Manual (Page 32)

32
TIME CODE menu
The underlining denotes the factory mode setting.
Setup Menus
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
500 VITC POS-1 0000
0001
0006
0010
10L
11L
16L
20L
For setting the position where the VITC signal is to be inserted.
(The same line as the one set for the VITC POS-2 item cannot be selected.)
501 VITC POS-2 0000
0001
0008
0010
10L
11L
18L
20L
For setting the position where the VITC signal is to be inserted.
(The same line as the one set for the VITC POS-1 item cannot be selected.)
502 VITC BLANK
0000
0001 BLANK
THRU
For setting whether the VITC signal is to be output.
0: The VITC signal is not output.
1: The VITC signal is output.
503 TCG REGEN
0000
0001
0002 TC&UB
TC
UB
For selecting the signal to be regenerated when the time code generator
(TCG) is in the regeneration mode (item No.506).
0: Both TC and UB are regenerated.
1: Only TC is regenerated.
2: Only UB is regenerated.
504 BINARY GP
0000
0001
0002
0003
0004
0005
0006
0007 000
001
010
011
100
101
110
111
For setting the status for using the user’s bit of the TCG.
0: Not specified (a character set is not used).
1: ISO characters (8-bit character set complying with ISO646, ISO2022)
2: Unassigned 1 (undefined)
3: Unassigned 2 (undefined)
4: Unassigned 3 (undefined)
5: Page/line (page/line multiplex system complying with SMPTE262M)
6: Unassigned 4 (undefined)
7: Unassigned 5 (undefined)
505 DF MODE
0000
0001 DF
NDF
For setting drop frame or non-drop frame for the CTL and TCG.
0: The drop frame mode is established for operation.
1: The non-drop frame mode is established for operation.
506 TC MODE
0000
0001
0002
0003 P-REC
P-FREE
I-REG
E-VITC
For setting the TCG mode.
1: PRESET of the internal TC is used in the REC RUN mode.
0: PRESET of the internal TC is used in the FREE RUN mode.
2: The internal TC is used in the regeneration mode.
3: The input video signal VITC is used in the regeneration mode.
507 TC PRESET For setting the TCG value.
508 UB PRESET For setting the user’s bit value.
509 TCG CF FLAG
0000
0001 OFF
ON
For setting the CF flag of the TCG to ON or OFF.
0: The CF flag is set to OFF.
1: The CF flag is set to ON.