Rs-232c – Panasonic DVCPRO AJ-D250P User Manual
Page 44
44
RS-232C
O
Query control commands
Sends data of computer
Return data from VTR
Description of command
[STX] QAL [ETX]
[STX] ALV0 [ETX]
Queries the address level.
[STX] QAO [ETX]
[STX] AOm [ETX]
Queries the audio output channels.
[STX] QCA [ETX]
[STX] CUPdata [ETX]
Queries the user’s bit data which was preset in the TCG.
[STX] QCB [ETX]
[STX] CUSdata [ETX]
Queries the user’s bit data of the TCG.
[STX] QCC [ETX]
[STX] CCPdata [ETX]
Queries the counter data (same as QCD).
[STX] QCD [ETX]
[STX] CDdata [ETX]
Queries the counter data (same as QCC).
[STX] QCE [ETX]
[STX] CTEdata [ETX]
Queries the TCG preset data.
[STX] QCF [ETX]
[STX] CDm [ETX]
Queries the drop frame mode.
[STX] QCM [ETX]
[STX] CHMm [ETX]
Queries the 12-/24-hour mode for the CTL display.
[STX] QCP [ETX]
[STX] CVPdata [ETX]
Queries the line where the VITC signal is to be inserted.
[STX] QCR [ETX]
[STX] CRNm [ETX]
Queries the signal to be regenerated when the TCG is in
the regeneration mode.
[STX] QCS [ETX]
[STX] CTSdata [ETX]
Queries the TCG data.
[STX] QCT [ETX]
[STX] CTdata [ETX]
Queries the TCG mode.
[STX] QCU [ETX]
[STX] CURdata [ETX]
Queries the user’s bit data of the TCR.
[STX] QCW [ETX]
[STX] CTMm [ETX]
Queries the TCG mode.
[STX] QCZ [ETX]
[STX] CTZm [ETX]
Queries the TCR read status.
[STX] QDF [ETX]
[STX] DFCm [ETX]
Queries the display mode of the counter display.
[STX] QEB [ETX]
[STX] EABm [ETX]
Queries the auto back recording.
[STX] QHC [ETX]
[STX] HCMdata [ETX]
Queries the cassette tape information.
[STX] QHE [ETX]
[STX] HTEm [ETX]
Sets the VTR’s operation mode at the tape end (at all times
other than recording).
[STX] QHI [ETX]
[STX] HTIm [ETX]
Queries the tape insertion mode.
[STX] QHR [ETX]
[STX] HTRdata [ETX]
Queries the remaining tape amount.
[STX] QHT [ETX]
[STX] HREm [ETX]
Sets the VTR’s operation mode at the tape end (when
recording).
[STX] QIC [ETX]
[STX] 1 [ETX]
Queries the product area classification code.
[STX] QID [ETX]
[STX] data [ETX]
Queries the equipment’s ID code.
[STX] QIE [ETX]
[STX] IEVdata [ETX]
Queries the E-E output and V-V output.