Primera Technology 510212 - Manual (Page 22)

Section 3: Getting Started 17
Digital Label Press 3 User’s Manual
2. Connect the Media Input Assembly Interface Cable as shown.
H. INSTALLING THE MEDIA OUTPUT ASSEMBLY
Press's Media Output Tray consists of two separate stages. The lower portion of the
tray assembly protects media during the printing process. The upper portion of the
tray collects the finished sheets as they leave the press. The Media Output Tray
Assembly locks in place on the right hand side of the press. The assembly has
extensions on either side that engage securing notches on the press as shown
below.
Impressa3.qxd 10/22/01 9:29 PM Page 17