Primera Technology 510212 - Manual (Page 70)

Section 8: Maintenance 65
Digital Label Press 3 User’s Manual
Your press is built to require a minimum amount of maintenance. Nevertheless,
there are a few procedures you can perform on a regular basis or as needed to
ensure the best possible performance.
A. SUPPLIES REQUIRED
For the procedures listed in this section, you will need the following items:
„ Isopropyl alcohol
„ Soft, lint-free cloth
„ Small vacuum cleaner (if available)
Or, to make these maintenance procedures more convenient, a Printer Cleaning
Kit is available from PRIMERA or your authorized reseller. This optional kit
includes the following:
„ Print head Cleaning Pens pre-moistened with 99.99% isopropyl alcohol for
cleaning your printer's Print head.
„ Cleaning Pads pre-moistened with 99.99% isopropyl alcohol for cleaning
your printer's rollers and general inside area.
B. CLEANING THE PRINT HEAD
This procedure is performed if you notice a streak running the length of the
page where ink was not transferred. This procedure should also be performed
approximately every 100 prints in order to maintain consistent print quality.
1. Turn the printer power OFF.
2. Open the printer's Top Cover by pressing the Cover Release Button.
Maintenance
8
Impressa3.qxd 10/22/01 9:30 PM Page 65