Primera Technology 510212 - Manual (Page 57)

D. PRINTING TO YOUR PRESS
Once you have successfully completed Part D of this section, you can then send
your file to be printed and cut. Refer to the following steps to begin printing.
1. Select Print from the File menu. The Print window appears.
2. Be sure Digital Label Press 3 is selected under the Printer option. The rest of
the options can be left at their default settings for most print jobs. Notice that
the number in the Copies box will automatically match the total number of
pages specified when you originally arrayed your image.
NOTE: If you intend to print with the #200-Series dye-sublimation print supplies, you may wish
to select one of the Anti-Aliasing options from the Preferences tab. Anti-Aliasing causes
printed images to appear more smoothly around the edges. In most cases, the Fine Anti-
Aliasing option provides the best print quality. DO NOT select anti-aliasing if printing
with #100 or #300-Series supplies, as it can actually degrade print quality with these
materials.
3. Click on the Printer Setup button. The Digital Label Press 3 Setup window
appears. Be sure that the appropriate printer driver settings are selected for
your upcoming print job. In particular, be sure that the proper Ribbon Type
option is selected and that the Fast 32-bit Spooler option is checked. Refer to
Section 6-D for more information on any of these printer driver options.
52 Section 7: Installing and Using the PressPrint Software for Windows
Digital Label Press 3 User’s Manual
Impressa3.qxd 10/22/01 9:29 PM Page 52