Primera Technology 510212 - Manual (Page 48)

Section 6: Installing and Setting Up the Printer Driver for Windows 43
Digital Label Press 3 User’s Manual
4. The Digital Label Press 3 Setup screen appears. Change the options as follows:
Paper Size
Press prints onto oversized Super B/A3-size print media. Super B/A3-size media
has a 12" x 20" (305 x 508mm) sheet size which provides a maximum printable area
of 11.71" x 17.3" (297 x 439mm). This means Press can print nearly the entire width
of a sheet, but that it requires a non-printable margin of about 1.5" (38mm) on the
top of the sheet and about 1.2" (30.5mm) on the bottom.
When printing from PressPrint, note that the default Blank Size is already set to
Press's maximum printable area of 11.71" x 17.3" (297 x 439mm). For best results,
leave the Blank Size set to these dimensions.
Ribbon Type
Click on the Ribbon Type down arrow. The following ribbon selections will appear:
Spot Color Resin (#300-Series), Process 3 Color Resin (#300-Series), and Process
3 Color Dye-Sub (#200-Series). Select the ribbon type option that's appropriate for
the type of ribbon you are using. See Sections 4-B, 4-E, and 4-F for a complete
description of all available ribbon types.
Color Matching
Click on the Color Matching down arrow and select the appropriate color
matching option. Select None if you are more interested in print speed rather than
print color, if you have already color corrected your image for printing, or if you
are using Press's PANTONE Color Matching Software.
Impressa3.qxd 10/22/01 9:29 PM Page 43