4 devices, Allow suspend with, Low power warning – Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual
Page 123: Slot power status, Built-in devices power status
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
99
Chapter 5: Configuration
Power Properties
Allow Suspend With
This tab allows you to specify whether or not your unit will enter suspend state
while is operating with an active PPP connection, network interface or active
TCP/IP connection.
Low Power Warning
The sliding scale under this section of the tab allows you to specify the remaining
battery capacity at which a warning message is displayed on the vehicle-mount
screen – 0% to 20%.
5.5.4.4
Devices
Slot Power Status
This tab allows you to enable or disable power to the individual CF, PC Card and
SDIO slots in your unit.
Built-In Devices Power Status
A checkmark next to Enable Bluetooth indicates that the unit’s built-in, Bluetooth
radio is enabled.