Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 193)

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 169
Chapter 6: Peripheral Devices & Accessories
Installing The Cradle And Cradle Mounting Plate
6.3.2 Installing The Cradle And Cradle Mounting Plate
Figure 6.1 Quick Release Mount Installed
First, the 8525 G2/8530 G2 must be attached to the cradle (Figure 6.2 on page 169).
To do this:
• Place the terminal in the cradle so that the ports face away from the quick
release fasteners.
• Match the side screw holes on the 8525 G2/8530 G2 with the appropriate
pairs of holes on the cradle and screw them together. The choice of holes
determines the angle at which the terminal tilts.
Figure 6.2 Mounting Cradle And Quick Release
Mounting Kit PN 1008424
Cradle Mounting Plate and Quick Release
Adaptor Plate PN 1008444
PN 1080363 and PN 17529
Adaptor Plate
Screw Holes
Tabs
10.75 cm
4.25 in.
5.25 cm
2 in.
29.8 cm
11.45 in.
Front
Back
Quick Release
Fasteners