Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 166)

Chapter 5: Configuration
Scanner Properties Setup
142 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
Suffix Char
Note: The appended character is treated as any other keyboard character.
For example, if [BKSP] is pressed, the usual action for that key is
performed. If your unit is operating with the Psion Teklogix ANSI
emulation application, the 8525 G2/8530 G2 transmits the escape
sequence associated with the function immediately after the bar
code data.
This character, if non-zero, is added after a successfully decoded bar code. Press the
key you want to insert in the dialog box attached to this parameter. The
ASCII/Unicode key value of the keypress is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.
Strip Leading
This parameter determines the number of characters that will be removed from the
beginning of the bar code before the prefix character is added.
Note: For Code 39 bar codes, the “AIAG Strip” is performed before the
“Strip Leading”.
Strip Trailing
The value entered in this parameter determines the number of characters that will be
removed from the end of the bar code before the suffix character is added.
5.5.13.6 Code 128 Settings
Enabled
Set this parameter to on to enable Code 128 or off to disable it.
Include Sym
Setting Include Sym to on causes the group separator(s) and start code contained in
this type of bar code to be displayed on the screen.
Note: This option is available only when ‘EAN/UCC 128’ is selected.