Enabling authentication traps, Adding a destination, Changing a destination – Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual
Page 185
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
161
Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup
Enabling Authentication TRAPS
Enabling Enable Authentication TRAPS allows authorization traps to be sent when
a failure is detected (e.g., an SNMP message received with a bad community name).
Adding A Destination
To add a new destination:
•
Tap on the Add button.
•
Type a destination in the text box provided, and press [ENTER].
Changing A Destination
To change an existing trap destination:
•
Highlight the destination you want to alter in the Trap Destination tab, and
then tap on the Change button.
A dialog box like the one displayed when you add a destination is displayed.
•
Make the changes to the destination, and tap on OK to save the changes.