3 trap destination tab, Modifying a community setting, Removing an existing community – Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual
Page 184
Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup
160
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
Modifying A Community Setting
To modify an existing community:
•
Highlight the community you want to alter.
•
Tap on Change.
A Modify Community dialog box is displayed, listing the community
you highlighted.
•
Edit the Name and/or Rights, and press [ENTER] to save your changes.
Removing An Existing Community
•
Highlight the community you want to remove in the Communities tab and
then tap on the Remove button.
A Delete Confirmation screen is displayed.
•
To remove a community, tap on Yes, or
If you decide not to remove the community, tap on No.
5.5.14.3 Trap Destination Tab
A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running
on the managed node. This option allows you to define where the report will be sent.