Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 143)

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 119
Chapter 5: Configuration
Bluetooth Setup
5.5.9.1 The Devices Tab
Note: If you intend to configure Bluetooth communication with specific devices
(e.g., a scanner or printer), turn on the devices and bring them within 5
metres of the vehicle-mount before proceeding with the discovery process
described below.
Scan
• Tap on the Scan button to list available devices.
Wait for the 8525 G2/8530 G2 to complete its scan (approximately 20 seconds).
When scanning starts, the Scan button will change to Stop – if necessary, you can
tap on this button to stop the process. Once scanning is complete, all discovered
devices will be displayed in the list box, with Name, Address, Active status, and
PIN information.
Note: During the scanning process, addresses are located first, followed by
names. Only the names of devices that are within the Bluetooth radio cov-
erage range will be retrieved.