9 upc a settings, 10 upc e settings, 9 upc a settings 5.5.13.10 upc e settings – Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual
Page 170: Addendum, Prefix/suffix chars, Enabled, Include number sys, Include check
Chapter 5: Configuration
Scanner Properties Setup
146
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
Addendum
Important:
Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 139) must be enabled (set to ‘ON’).
Refer to “Addendum” on page 144.
Prefix/Suffix Chars
See “Prefix/Suffix Chars” on page 144.
5.5.13.9 UPC A Settings
Enabled
Set this parameter to on to enable UPC A or off to disable it.
Include Number Sys
If this parameter is enabled (set to on), the number system digit is included with the
decoded bar code data.
Include Check
If this parameter is enabled (set to on), the check digit will be included with the
decoded bar code data.
Addendum
Important:
Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 139) must be enabled (set to ‘ON’).
Refer to “Addendum” on page 144.
Prefix/Suffix Chars
See “Prefix/Suffix Chars” on page 144.
5.5.13.10 UPC E Settings
Enabled
Set this parameter to on to enable UPC E or off to disable it.