Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 139)

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 115
Chapter 5: Configuration
Narrow Band Radio Setup
Late TX Limit
The value entered for this parameter (measured in milliseconds) sets the maximum
allowable deviation time from the start of a response window during which an 8525
G2/8530 G2 can make a transmission. After this threshold, the transmission will not
be attempted and the 8525 G2/8530 G2 will try again at the next opportunity. For
example, suppose this parameter is set to 5. From the beginning of the response
window, the 8525 G2/8530 G2 can be up to 5 milliseconds late sending a
transmission. Beyond this threshold, the transmission is not attempted. The
vehicle-mount waits for the next opportunity.
The allowable range for this parameter is from 1 and 10 – the default value is 2.
Test Polling Values
• Tap on the Test Polling Values button to test the polling values indicated in
this dialog box without committing them to memory.
To commit the new polling values to memory:
• Tap on the OK button – the dialog box is closed and the new values
are saved.
To discard the new values, and retain the existing values:
• Tap on the X button at the top of the dialog box.
5.5.8.4 Power Tab
Enable Power Saving
When this parameter is checked, power saving is enabled.