Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 179)

Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 155
Chapter 5: Configuration
Scanner Properties Setup
Parity
This parameter determines the type of parity checking used on the data going
through the tether port. Double-tapping on this option displays a pop-up window in
which you can choose the appropriate Parity.
Stop Bits
This parameter specifies the number of stop bits – 1, 1.5 or 2 – used for
asynchronous communication.
5.5.13.22 Serial Port (COM 2)
Enabled
This parameter must be set to on in order for the 8525 G2/8530 G2 to recognize the
device connected to the serial port.