Psion Teklogix Vehicle-Mount Computer 8525 G2 - Manual (Page 194)

Chapter 6: Peripheral Devices & Accessories
Installing The Cradle And Cradle Mounting Plate
170 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
Installing The Cradle Mounting Plate
Next, the cradle mounting plate must be attached to the vehicle. The cradle
mounting plate shown in Figure 6.3 holds the 8525 G2/8530 G2 and cradle in place.
• Screw the cradle mounting plate onto the vehicle using the four 1/4" holes.
Note: The bolts used for all installations are SAE 1/4-20.
Figure 6.3 The Cradle Mounting Plate
Attaching The Cradle To The Cradle Mounting Plate
Next, the 8525 G2/8530 G2 and cradle must be attached to the cradle
mounting plate.
• Align the tabs on the front of the cradle to the tab guides on the mounting
plate and push the cradle back and down.
• Slide the fasteners on the back of the cradle until they snap to the posts on
the mounting plate.
Warning: Never operate the vehicle if the quick release fasteners are
not locked.
Post
Tab
Guides
25.4 cm
10.0 in.
Front
Back
13 cm
5 in.