Pentax Optio Z10 - Manual (Page 177)

175
8
Settings
When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1
Use the four-way controller (23) to select [Video Out]
on the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23)
to select [NTSC] or [PAL].
Choose the video output format to match
the output format of the AV equipment.
4
Press the 4 button.
The Video Out setting is saved.
Changing the Video Output Format
Depending on the country or region, images and sound files may fail
to be played back if the video output format is set different from the
one in use there. If this happens, change the video output format
setting.
Connecting the Camera to AV Equipment 1p.126
Setting
Format
Sound
0 1 / 0 1 / 2 0 0 7 Date Adjust
Alarm
World Time
MENU Exit Exit Exit
1 / 3
MENU
How to display the [W Setting] menu
Four-way controller
3 button
4 button
Setting
Power Saving
Auto Power Off
date
3 min
5 sec
USB Connection
Video Out
Brightness Level
2 / 3
MENU Cancel Cancel Cancel OK OK OK OK
Folder Name
P C
N T S C
PA L