Pentax Optio Z10 - Manual (Page 183)

181
8
Settings
You can choose an image to be displayed as the start-up screen when
the camera is turned on.
1
Press the Q button.
The camera enters Q mode.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select ^
(Start-up Screen).
4
Press the 4 button.
The image selection screen appears.
5
Use the four-way controller (45)
to choose an image for the start-
up screen.
6
Press the 4 button.
The Start-up Screen setting is saved.
Changing the Start-up Screen
• Once the start-up screen has been set, it will not be deleted even
if the original image is deleted or the SD Memory Card or built-in
memory is formatted.
• Select [Off] to hide the start-up screen.
Start-up Screen Start-up Screen Start-up Screen
OK OK OK OK MENU Cancel Cancel Cancel
How to display the Playback Mode Palette
Q button
4 button
Four-way controller
1 0 0 1 0 0 - 0 0 1 7 0 0 1 7 1 0 0 - 0 0 1 7
MENU C a n c e l C a n c e l O K O K C a n c e l OK O K