Pentax Optio Z10 - Manual (Page 92)

90
4
T
aking
Pictu
res
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the number of recorded
pixels.
5
Press the 4 button.
The Recorded Pixels setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
• When shooting mode is set to Y, the number of recorded pixels
is set to h and quality level is set to D.
• When drive mode is set to c, the number of recorded pixels is set
to h.
• The number of recorded pixels for Images captured in the Digital
Wide Mode is fixed to f. (However, the number of recorded
pixels will be h if a second picture is not taken.)
• If you use the [Recorded Pixels] function frequently, you can save
time by assigning it to the { Setting of Green button. (p.57)
Recorded Pixels and Quality Level of Still Pictures 1p.29
5 M
4 M
3 M
2 M
1024
640
8 M
Storage Capacity
MENU Cancel Cancel Cancel OK OK
12
Recorded Pixels
Quality Level
White Balance
AE Metering
Sensitivity
AF Setting