Pentax Optio Z10 - Manual (Page 67)

65
4
T
aking
Pictu
res
* The Green Mode settings are as shown below.
• In Green Mode, you cannot change the information displayed on
the LCD monitor by pressing the 4/W button.
• You cannot use the [A Rec.Mode] menu or Capture
Mode Palette in Green Mode. If you try to display the
[A Rec.Mode] menu or Capture Mode Palette, -
(key lock icon) appears.
• If you switched to Q mode from Green Mode, you
cannot display the [W Setting] menu by pressing the
3 button. If you try to display the [W Setting] menu, - (key
lock icon) appears.
• When the camera is turned off in the Green Mode, it turns on in the
Green Mode next time the power switch is pressed.
Flash Mode , (Auto)
Drive Mode 9 (Standard)
Focus Mode = (Standard)
Information Display Normal
Recorded Pixels E
Quality Level D (Better)
White Balance F (Auto)
Focusing Area J (Multiple)
Focus Limiter P (Off)
AE Metering L Multi-segment metering
Sensitivity Auto 64-800
EV Compensation ±0.0
Digital Wide P (Off)
Digital Zoom O (On)
Instant Review 1sec
Sharpness G (Normal)
Saturation G (Normal)
Contrast G (Normal)
Date Imprint P (Off)
38 38 38
G r e e n m o d e m u s t
b e c a n c e l e d t o u s e
t h i s f u n c t i o n .
Key lock icon