Pentax Optio Z10 - Manual (Page 61)

59
3
Co
mmo
n Oper
atio
ns
1
Press the Green button in A
mode.
The function assigned to [Green Button] on
the [A Rec.Mode] menu is called up.
When [Fn Setting] is called up, the functions
assigned to the four-way controller
(2345) are displayed.
2
Use the four-way controller
(2345) to select the function
you want to change.
3
Change the settings and press the
4 button or the Menu button.
The camera returns to capture status.
Using the Green Button
• If the Sensitivity function has been assigned to a four-way
controller key for [Fn Setting], the automatically adjusted range for
AUTO cannot be changed using the operation described here. If
the White Balance function has been assigned to a four-way
controller key, the white balance setting cannot be changed using
the operation described here. Use the menu to manually select a
setting in advance.
• If a function other than the Green Mode has been assigned to the
Green button, the camera returns to the original screen if no operation
is performed for one minute after the Green button is pressed.
38 38 38
+ 1 . 0 + 1 . 0 + 1 . 0