Pentax Optio Z10 - Manual (Page 33)

31
1
Getting Started
Appropriate Number of Recorded Pixels According to Use
The default setting is m (640×480).
Appropriate Quality Level According to Use
The default setting is C (Best).
Appropriate Frame Rate According to Use
The default setting is 30fps (frames per second).
Recorded Pixels, Quality Level, Frame Rate and Recording Time
(Approximate recording time)
• The above figures are based on PENTAX standard shooting conditions and may vary
depending on the subject, shooting conditions and type of SD Memory Card used.
• Recording can continue until the built-in memory/SD memory card is full, or the size of
the recorded movie reaches 2 GB (when using an SDHC card). If recording stops at 2
GB, start recording again to continue to record the rest of the movie in blocks of 2 GB.
m
(640×480)
Suitable for viewing on a TV or computer screen.
D
(320×240)
Suitable for posting on a website or attaching to e-mail.
C Best
Clearer images
D
Better
E
Good Grainier images
30fps Produces high quality movies, but reduces the total recording time.
15fps Increases the total recording time because the file size is smaller.
30fps 15fps Sound
Built-in
Memory
256 MB
Built-in
Memory
256 MB
Built-in
Memory
256 MB
m
640×480
C 49 sec.
3 min.
47 sec.
1 min.
38 sec.
7 min.
28 sec.
41 min.
17 sec.
3 hr.
8 min.
53 sec.
D
1 min.
6 sec.
5 min.
5 sec.
2 min.
13 sec.
10 min.
10 sec.
E
1 min.
41 sec.
7 min.
42 sec.
3 min.
16 sec.
14 min.
57 sec.
D
320×240
C
1 min.
19 sec.
6 min.
3 sec.
2 min.
31 sec.
11 min.
33 sec.
D
1 min.
47 sec.
8 min.
12 sec.
3 min.
28 sec.
15 min.
53 sec.
E
2 min.
31 sec.
11 min.
33 sec.
5 min.
3 sec.
23 min.
6 sec.