Pentax Optio Z10 - Manual (Page 26)

24
1
Getting Started
• Image Storage Capacity, Movie Recording Time, Sound
Recording Time, and Playback Time
(at 23 ° C with the LCD monitor on and the battery fully charged)
*1: Recording capacity shows approximate number of shots recorded during
CIPA-compliant testing (with LCD monitor on, flash used for 50% of the
shots, and 23 degrees centigrade). Actual performance may vary
according to operating conditions.
*2: According to the result of in-house testing.
• Battery Level Indicator
You can check the battery level by the indicator on the LCD monitor.
• This camera uses a rechargeable lithium-ion battery D-LI72. Use
of any other type of battery may damage the camera and cause
malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented,
malfunction may result.
• Do not remove the battery while the camera is turned on.
• If you do not intend to use the camera for a long time, remove the
battery.
• The date and time may be returned to the default setting if the
camera is left without the battery for a long time.
Image Storage
Capacity
*1
(flash used for 50%
of shots)
Movie Recording
Time
*2
Sound Recording
Time
*2
Playback Time
*2
180 pictures 65 min. 190 min. 150 min.
• In general, battery performance may temporarily deteriorate as
the temperature decreases.
• Be sure to take a spare battery with you when traveling abroad or
to a cold region, or if you intend to take a lot of pictures.
Screen Display Battery Status
(green) Adequate power remains.
(green) Battery is running low.
(yellow) Battery is running very low.
(red) Battery is exhausted.
[Battery depleted] The camera will turn off after this message appears.