Pentax Optio Z10 - Manual (Page 196)

194
9
App
endi
x
Troubleshooting
Problem Cause Remedy
The camera will
not turn on
The battery is not
installed Check if a battery is installed. If not,
install a battery.
The battery is installed
incorrectly Check orientation of the battery. Reinsert
battery according to +- symbols. (p.23)
The battery power is
low
Charge the battery.
No image appears
on LCD monitor
The camera is
connected to a PC The LCD monitor is off when the camera
is connected to a computer.
The camera is
connected to a TV The LCD monitor is off when the camera
is connected to a TV.
The LCD monitor is set
to OFF Press the 4/W button to turn
the LCD monitor on. (p.83)
The image is displayed
but is hard to see
The image on the LCD monitor may be
hard to see when taking pictures outside
in sunlight. Increase brightness of the
LCD monitor. (p.176)
The shutter will
not release
The flash is charging
Pictures cannot be taken while the flash
is charging. Wait until charging is
finished.
No available space on
SD Memory Card or in
the built-in memory Insert an SD Memory Card with available
space or delete unwanted images. (p.26,
127)
Recording Wait until recording is finished.
The picture is dark
The subject is too far
away in a dark
environment, such as
a night scene
Picture becomes dark if the subject is too
far away. Take pictures within range of
flash.