Pentax Optio Z10 - Manual (Page 98)

96
4
T
aking
Pictu
res
You can select the ISO sensitivity to suit the brightness of the
surroundings.
ISO Sensitivity
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the ISO sensitivity.
5
Press the 4 button.
The ISO sensitivity setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
Setting the ISO Sensitivity
AUTO
The sensitivity is automatically adjusted in the range set in the procedures
described in “Setting Automatic Sensitivity” (p.97).
64
• The lower the ISO sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
• Higher ISO sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected by noise.
100
200
400
800
1600
3200
• When you set the shooting mode to 4, the AUTO range is set
to 64-3200.
• If you use the [Sensitivity] function frequently, you can save time
by assigning it to the { Setting of Green button. (p.57)
Saving the ISO sensitivity 1p.105
Rec.Mode
MENU ਞၭ ਞၭ Exit
1 / 3
Recorded Pixels
Quality Level
White Balance
AE Metering
Sensitivity
AWB
AUTO
AF Setting
800
ɣ
8 M MENU
Four-way controller
3 button
4 button
Rec.Mode
OK OK OK OK MENU ৾ક ৾ક Cancel
1 / 3
4 0 0
2 0 0
1 0 0
6 4
8 0 0
1 6 0 0
3 2 0 0
Recorded Pixels
Quality Level
White Balance
AE Metering
Sensitivity
AF Setting
AUTO 800
ɣ