Pinnacle Speakers DEKO500 - Manual (Page 10)

Starting and Exiting Deko500 8
Deko500 User’s Guide
S TARTING W INDOWS NT
To start Windows NT:
1. Turn on the power to the PC. The computer monitor shows a series of diagnostic
screens, then displays the Windows NT startup screen. Press Ctrl+Alt+Delete to
log on.
2. Enter your user name and password, then press Enter. If you don’t have a user
name, log on as user
Deko500 . This user name is installed at the factory and
does not require a password.
Notes
Once you log on, you will see the Windows NT Program
Manager. This is the main screen of Windows NT, from which
you can launch any application program, including Deko500.
You must be privileged as a System Administrator or Power
User to run Deko500. For more information about Windows
NT, refer to the Windows NT documentation supplied with
Deko500.
S TARTING D EKO 500
To start Deko500:
1. Close or minimize windows, if necessary, to access the start-up screen
of your desktop.
2. Do one of the following:
Double-click the Deko500 program icon.
Hold Ctrl and press Tab as necessary to activate the Deko500
program group, use the cursor keys to highlight the Deko500
program icon, then press Enter.
To start Deko500 automatically, every time you boot up
Windows NT:
1. From the Options menu, choose Preferences.
2. Choose Common at the top of the Preferences dialog box.
3. Check On re-boot, automatically log on to NT.
4. Enter your user password.
5. Press Enter or click OK.
Note
To use the auto-login feature, you must be privileged as a
System Administrator and must also supply a password. Please
refer to the Windows NT documentation for details.