Tab stops, To set a tab stop, To clear a selected tab stop – Pinnacle Speakers DEKO500 User Manual
Page 37: To clear all tabs within a layer, To move a tab stop, To cut or copy a tab stop
Justifying Text and Using Tab Stops
35
Deko500 User’s Guide
T
AB
S
TOPS
To set a tab stop:
1.
Position the cursor where you will insert the tab stop.
2.
From the Text menu, choose Tab Set.
3.
Choose an alignment (Right, Left, Center or Decimal) from the
drop-down menu.
4.
The current tab settings for a text field are displayed at the bottom
of the text field box, using the following markers:
Left:
Right:
Center:
Decimal:
5.
Whenever you Tab to a tab stop, a similar tab marker is displayed
to the left of the first character at the tab stop.
To clear a selected tab stop:
1.
Tab to the tab stop.
2.
From the Text menu, choose Tab Clear.
To clear all tabs within a layer:
From the Text menu, choose Tab Clear All.
To move a tab stop:
1.
Position the cursor to the left of the tab stop.
2.
In the Options menu, choose Transform and set increment of
change to Coarse or Fine (Ctrl+spacebar).
3.
Do one of the following:
In the Options menu, select Transform, then Move.
Click the move button in the Tools window.
4.
Hold Alt and use the right or left arrow keys (
→
←
←
←
←
) to move the
tab stop.
To cut or copy a tab stop:
1.
Select the tab stop you wish to cut or copy.
2.
Do one of the following:
To remove the selected tab stop from its current position,
choose Cut (Ctrl+X) from the Edit menu, or click the cut
button in the Tools window.
To copy and leave the selected tab stop intact, choose Copy
(Ctrl+C), then Tabs, from the Edit menu, or click the copy
button in the Tools window.