Pinnacle Speakers DEKO500 - Manual (Page 57)

Specifying a Look 55
Deko500 User’s Guide
H offset
Offsets the frame horizontally relative to the detail being framed.
V Offset
Offsets the frame vertically relative to the detail being framed.
Descenders
Lowers the bottom of the frame to accommodate lower case
descender characters like g, j and y.
Spaces
Frames the spaces between words.
Priority
Determines whether the frame appears in front of or behind other
details. By default, Deko500 assigns a priority to each detail so
that they render from front to back, in the order they appear in the
Details list. Use Priority to change the rendering order. Priority
ranges from 0 (closest to viewer) to 1000 (farthest from viewer).
Priority also controls the rendering order of overlapping details
from different styles.
To next detail
Determines what this frame will send to the detail immediately
below it in the Details list:
previous
sends whatever was sent to the frame from the detail above it.
this
sends the frame only.
merged
sends the combination of the frame and whatever was sent to
the frame from the detail above it.
C UTTING AND P ASTING D ETAILS AND L OOKS
To cut or copy a detail:
1. Activate the Style window.
2. Choose Look at the top of the Style window.
3. In the Details list, click on the detail you wish to cut or copy.
4. Do one of the following:
To remove the selected detail from its current position, choose
Cut Detail (Ctrl+X) from the Edit menu, or click the cut
button in the Tools window.
To copy and leave the selected detail intact, choose Copy
Detail (Ctrl+C) from the Edit menu, or click the copy button
in the Tools window.