Pinnacle Speakers DEKO500 - Manual (Page 31)

Cutting, Pasting, Finding, Replacing, and Moving Text 29
Deko500 User’s Guide
To draw a curved baseline:
1. Select the layer whose baseline you wish to modify.
2. Activate the Baseline Edit window.
3. Do one of the following:
In the Baseline menu, check Draw Curve.
Click the curve drawing tool button in the Tools window.
4. Position the drawing tool where you will begin the curve, and drag
the mouse to draw the curve.
To draw a line-segment baseline:
1. Select the layer whose baseline you wish to modify.
2. Activate the Baseline Edit window.
3. Do one of the following:
In the Baseline menu, check Draw Curve.
Click the curve drawing tool button in the Tools window.
4. Click to begin the line, then move the drawing tool to the desired
end point and click again. Repeat this step as desired to draw
multiple line segments.
5. To break the line, move the cursor out of the Baseline Edit
window.
To use a rectangle or ellipse as a baseline:
1. Select the layer whose baseline you wish to modify.
2. Activate the Baseline Edit window.
3. Click the rectangle or ellipse button in the Tools window, then
drag the cursor in the Baseline Edit window to define the rectangle
or ellipse.
4. Once you release the mouse button, you will be in Edit Curve
mode. Drag points as desired to edit the baseline.
Note
Holding Ctrl as you drag the cursor maintains a square or
round baseline.
To apply a baseline:
Once you have drawn or edited the baseline as desired, do one of
the following:
To apply the baseline and remain in baseline edit mode,
choose Apply Baseline (Enter) from the Baseline menu.
To apply the baseline and close the Baseline Edit window,
choose Accept Baseline (Alt+Enter) from the Baseline menu.