Pinnacle Speakers DEKO500 - Manual (Page 91)

Creating a Sequence 89
Deko500 User’s Guide
loop
Repeats subsequent events “Time” times, until an “end” is
encountered. Loops can be nested.
end
Ends the current loop.
go to
Skips to event number in “Time” field.
Effect
See About Deko500 Effects for descriptions of effects.
Layers
The graphic element, e.g. layers, background, row, etc., on
which to perform the effect. Options depend on the specified
effect. Leave this column blank to perform the effect on the
entire graphic.
File Name
The name of the graphic file on which to perform the effect.
Press Ctrl+L or click the Browse button to select the file from
the Graphic Browser window.
Rate
The rate at which Deko500 performs the effect, as specified
here or with Sequence/Playback Rate.
Units
The unit of measurement for rate.
To save a sequence:
1. Activate the Sequence window.
2. From the File menu, choose Save Sequence As (F12).
3. In the dialog box, navigate to the drive and directory where you
will store the file.
4. Type a file name in the File Name text box, then click OK or press
Enter.
Note
When you save a sequence, Deko500 automatically attaches
“.seq” to the file name. Do not type a different extension.
To append a sequence to the active sequence:
1. Activate the Sequence window in which you will insert the second
sequence.
2. From the File menu, choose Append to Sequence.
3. In the Append Sequence dialog box, navigate to the drive and
directory that contain the sequence (.seq) file you wish to append.