Installing truetype and postscript fonts, To install a truetype or postscript font, Copying and pasting a font – Pinnacle Speakers DEKO500 User Manual
Page 42: To copy and paste a font
Specifying a Font
40
Deko500 User’s Guide
digits
The digits 0-9 are monospace, but all other characters are
proportional.
Note
For many typefaces, there is no difference between
“proportional” and “digits” spacing. In other words, the fonts
were designed with monospaced digits.
Keyboard
Selects the keyboard language layout for typing with the font.
Orientation
Determines field orientation, i.e. left-to-right, top-to-bottom, etc.
Note
Right-to-left is available only for Arabic or Hebrew, and top-
to-bottom and top-to-bottom-rotated are available only for
Chinese, Japanese or Korean.
Pre-rendered style
Indicates that this style was previously rendered and saved so it
can be typed quicker.
I
NSTALLING
T
RUE
T
YPE AND
P
OSTSCRIPT
F
ONTS
To install a TrueType or Postscript font:
1.
Close or minimize windows as necessary to access the start-up
screen of your desktop.
2.
Click the Start button in the bottom lefthand corner of the screen,
then click Settings, then Control Panel.
3.
Double-click Fonts.
4.
Select the fonts to install. Refer to help for the Fonts dialog box for
detailed help with font installation.
Note
Once fonts have been installed in Windows NT, you must
restart Deko500 before those fonts are available in Deko500.
C
OPYING AND
P
ASTING A
F
ONT
To copy and paste a font:
1.
Select text whose font you wish to copy.
2.
From the Edit menu, choose Copy (Ctrl+C), then Font.
3.
Select the text or position the cursor where you will apply the font.
4.
From the Edit menu, choose Paste (Ctrl+V), or click the paste
button on the text bar.