Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 - Manual (Page 14)

2.7 Configuration NAS
• This procedure only needs to be done ONCE, by the NAS’s Administrator.
• Other LAN users should follow the advice given in using your NAS described in the
following section.
Quick Setup with the NAS Wizard
1. Please insert User’s Manual and Utility CD into the CD-ROM drive to initiate the autorun
program. Once completed a menu screen will appear.
2. Click on “Initial Utility” hyper link to initiate the installation. If the autorun program is not
process in your PC, you can click the “Start” button and choose “Run”. (Suppose “E” is
your CD-ROM drive). When the dialog box appears, enter “E:\Utility\Setup.exe” and press
enter key. You will see the dialog box as below. Please click the “Setup” button.
3. After click, you will see the screen as below. The utility will auto search your network and
find out your NAS.
A list of all the NAS’s on your network will show on the left side. The right side displays
details of the currently selected NAS.
If the desired NAS is not listed, check the following:
• The NAS has finished the start up and boot process.
• Your PC and the NAS are on the same IP segment.
• Click “Refresh” button to search again.
Otherwise, select the desired NAS, and click the "Next" button.
13