Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 - Manual (Page 38)

Send E-Mail... Check this to enable the sending of e-mail alerts by the NAS. Alerts will
be sent when there is some problem requiring the Administrator's
attention.
E-Mail Address Enter from 1 to 3 E-Mail Addresses. The messages generated by the
NAS will be sent to these destinations. Note that special characters (e.g.
" / \ [ ] : ; | = , + * ? < > ' `) cannot be used in them.
From Address
(Optional) Specify one E-Mail Address that appear in the "From" field of e-mail alert
generated by the NAS. Usually it's helpful for e-mail alerts to avoid being
filtered as junk mails.
Subject (Optional) Enter the text you wish to appear in the "Subject" field of e-mail alert
generated by the NAS. Note that special characters (e.g. " / \ [ ] : ; | = . ,
+ * ? < > ' `) cannot be used in it.
Send Test Mail Send test mail to specified e-mail address to verify whether the e-mail
address can be reached.
Use Specified
SMTP Mail Server You can specify one SMTP (Simple Mail Transport Protocol) server to be
used to send E-Mail. It's optional.
SMTP Mail Server Specify the address of the SMTP Mail Server.
SMTP Port Number Specify the port number used by SMTP server. It's 25 by default.
Mail Server requires If the SMTP Server requires a "login" in order to send mail, check it and
37