Planet Technology 2-Bay SATA NAS RAID Server NAS-7200 - Manual (Page 29)

4.4 Setup Menu - Status Screen
This screen used to check the details and status of NAS
System z Server Name - Current name of the NAS. This name will be shown
in "Network Neighborhood" or "My Network Places". The NAS has
one default server name. Server Name is restored to default one
after configuration restore.
z Firmware Version - Current version of the firmware in the NAS.
z Hardware Address - Hardware Address of the NAS.
z IP Address - IP Address currently used by the NAS.
z Date - Current date of the NAS.
z Time - Current time of the NAS.
z Current Status - Indicates the current status of the NAS. This will
usually state "Ready".
If the NAS is not ready, the message will say why the NAS is not
ready.
28